SV Family -- With Superior Surge Survival™ |
| ||||
Input: | Model | SVDA/ | SVDA/ | SVDA/- | SVDA/- | SVDA/- | SVDA/- |
Impedance (Rc) | Ohm | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
Turn-on Voltage (Min.) | VDC | 4V@5.4mA | 4V@5.4mA | 4V@3.5mA | 4V@3.5mA | 4V@3.5mA | 4V@3.5mA |
Turn-on Voltage (Max.) | VDC | 32V@10mA Max (current limited) | 32V@10mA Max (current limited) | 32V@6.5mA Max (current limited) | 32V@6.5mA Max (current limited) | 32V@6.5mA Max (current limited) | 32V@6.5mA Max (current limited) |
Turn-off Voltage (Max.) | VDC | 1 | 1 | 1 | 1 | 1 | 1 |
Reverse Voltage Protection | VDC | -75 | -75 | -75 | -75 | -75 | -75 |
Input: 100 to 280 VAC | Model | SVAA/ | SVAA/ | SVAA/ | SVAA/ | SVAA/ | SVAA/ |
Schematic Number | 0 | 2 | 2 | 2 | 2 | 2 | 2 |
Impedance (Rc) | KOhm | 20 | 20 | 20 | 20 | 20 | 20 |
Turn-on Voltage (Min.) | VAC | 100 | 100 | 100 | 100 | 100 | 100 |
Turn-off Voltage (Max.) | VAC | 20 | 20 | 20 | 20 | 20 | 20 |
Reverse Voltage Protection | N/A | N/A | N/A | N/A | N/A | N/A | |
Output: (For All Models) | |||||||
I OUT (Continuous w/proper heatsink) | A RMS | 10 | 25 | 50 | 75 | 50 | 75 |
Voltage Drop @ I OUT | VAC | 1.1 | 1.2 | 1.3 | 1.1 | 1.3 | 1.1 |
I SURGE - 1 Cycle Non-repetitive | A PEAK | 100 | 250 | 650 | 950 | 650 | 950 |
I SURGE - 1 Second Non-repetitive | A PEAK | 40 | 100 | 130 | 140 | 130 | 140 |
Voltage Range (V OUT ) | VAC | 24-330 | 24-330 | 24-330 | 24-330 | 24-660 | 24-660 |
Peak Blocking Voltage | 800 | 800 | 800 | 800 | 1200 | 1200 | |
Frequency Range | Hz | 47-63 | 47-63 | 47-63 | 47-63 | 47-63 | 47-63 |
Leakage @ V OUT (max.) | mA | 8 | 8 | 8 | 8 | 8 | 8 |
Turn-on (max.) | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | |
Turn-off (max.) | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | 1/2 cycle | |
Holding current (min.) | mA | 50 | 50 | 50 | 50 | 50 | 50 |
Zero voltage switching | Yes | Yes | Yes | Yes | Yes | Yes | |
Dv/Dt @ V OUT (max.) | Vus | 750 | 750 | 1000 | 1000 | 500 | 500 |
Commutating Dv/Dt | .5 | .5 | .5 | .5 | .5 | .5 | |
I 2 T Fusing (8.3 ms.) | A 2 S | 35 | 260 | 1035 | 3745 | 1035 | 3745 |
Thermal resistance R 0JC (Tj=115 o C) | 0 C/W | 1.48 | 1.05 | .65 | .30 | .65 | .65 |
General Characteristics: | |||||||
Dielectric strength (Input-Output-Base) | V RMS | 4000 | 4000 | 4000 | 4000 | 4000 | 4000 |
Capacitance Input to Output | pf | 3 | 3 | 3 | 3 | 3 | 3 |
Ambient temp. range (Operating) | 0 C | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 | -40 to +100 |
Adequate heatsinking, including consideration of air temperature and flow, is essential to the proper operation of a solid state relay. Units should not be mounted in an enclosed area without proper air flow. Units should also never be mounted to a plastic base or to a painted surface. Proper thermal transfer gel or pad should be applied to the heatsink before mounting the relay. Failure to provide adequate heatsinking will cause a solid state relay to fail. |
:+86
传真:+86
电子邮件：info@coastaltrading.com.cn