湾边贸易有限公司优势供应美国泰科TYCO AMP航空压接工具47387，美国原厂进口

TYCO AMP航空压接工具、，压接线端子、端子压接尺寸1.25-2.0（16-14）0.6-1.5（20-16）连接器均为原装，美国进口代理价格最低。

Tyco压接工具，AMP安普压线钳，AMP压PIN钳，AMP压制工具，TYCO安普网线钳,AMP压线工具，安普打线工具, AMP端子连接工具价格，AMP航空压接工具价格最低，TYCO AMP HAND TOOL, TYCO AMP TERMINALS，DAHT Double Action Hand Tool深圳湾边贸易美国代理进口价格优惠！

现货AMP工具

91577-1
91529-1
91522-1
91500-1
91558-1

AMP 47387航空及军事用压嘴工具，资料如下，

CERTI-CRIMP II SAHT

Fixed dies

Straight action jaw closure

Ratchet mechanism ensures complete crimp cycle

Emergency only ratchet release

Terminal/wire positioning aids & Ins. adjustment on most tools

Ergonomic non-slip handles

Approximate weight 0.59 kg (1.3 lbs)

Standard Straight Action Hand Tool Design

Widely used in the Aircraft and Military industries

---------------------

Tyco压接工具，AMP安普压线钳，AMP压PIN钳，AMP压制工具，TYCO安普网线钳,AMP压线工具，安普打线工具, TYCO AMP HAND TOOL, TYCO AMP TERMINALS

DAHT Double Action Hand Tool

46121,47907-1,45160,45449,45575-1,45450,58489,59270,69959,576780,576789,576791,576782,576783,576784,69363,49935,45592,47386,47387

CERTI-CRIMP II

1901600-1, 1901611-1 ,91505-1,91503-1,91520-1,91517-1,91516-1,91533-1,91531-1,91518-1,91551-1,91515-1,91516-1,91512-1,91506-1,91510-1,91508-1,91506-1,91536-0,91529-1,91522-1,91594-1,91526-1,91515-1,91519-1 91503-1 ,91558-1 ,91560-1 ,91500-1 ,91521-1

SDE Premium Crimp Toolin

58433-1,58433-2,318450-1,318452-1,318451-1,58531-2,58531-1,58531-3,58433-2,58501-1,58506-3,58500-1,58499-1,58558-1,58559-1,58621-1,58622-1,58663-1

Hydraulic Equipment

69120-2,69120-1,59907-7,1804700-1,1804700-2,59974-1,59975-1,59973-1,1890748-1,1890749-1,69055,69099,69051,69066,58422-1,47820,47821,57822,47823,47824,4782547915,47918,58422-1,

305183 Extraction Tools

91285-1 INSERT/EXTRACT TOOL ASSEMBLY

169404 CERTI-LOK DIE

1-1579007-6 Extraction Tools

--------------------

深圳湾边贸易

91572-1 AMP CT 2.0 Receptacle 0.12 - 0.4 (26-22)

91576-1 AMP DYNAMIC D-2 0.08 - 0.22 (28-24)

91595-1 AMP DYNAMIC D-2 0.4 - 1.0 (22-18)

91558-1 AMP DYNAMIC D-3 0.6 - 1.5 (20-16)

91559-1 AMP DYNAMIC D-3 0.2 - 0.6 (24-20)

91503-1 AMPLIMITE HD-20 0.08 - 0.6 (28-20)

Ins. Ø0.76-1.52mm

91513-1 AMPLIMITE HD-20 0.4 - 1.0 (22-18)

91548-1 AMPLIMITE HD-20 0.08 - 0.6 (28-20)

91549-1 AMPLIMITE HD-20 0.08 - 0.22 (28-24)

Ins. Ø0.76-1.52mm

91520-1 AMPLIMITE HD-22 0.08 - 0.4 (28-22)

Ins. Ø0.76-1.27mm

91537-1 AMPMODU II FFC 0.15 - 0.4 (26-22)

91516-1 AMPMODU IV 0.05 - 0.6 (30-20)

91517-1 AMPMODU IV, V 0.15 - 0.4 (26-22)

Ins. Ø1.02-1.52mm

91512-1 Commercial MATE-N-LOK 0.2 - 1.0 (24-18)

Ins. Ø1.52-2.54mm

91501-1 Micro MATE-N-LOK 0.2 - 0.6 (24-20)

Ins. Ø0.89-1.53mm

91502-1 Micro MATE-N-LOK 0.05 - 0.12 (30-26)

Ins. Ø0.89-1.53mm

91522-1 Mini-Universal MATE-N-LOK 0.4 - 1.0 (22-18)

Ins. Ø1.5-2.39mm

91529-1 Mini-Universal MATE-N-LOK 0.15 - 0.4 (26-22)

Ins. Ø1.19-1.75mm

91536-1 Mini-Universal MATE-N-LOK "F" Ins. Crimp 0.5 - 1.42 (22-16)

Ins. Ø2.0-3.2mm

91594-1 Mini-Universal MATE-N-LOK "O/L" Ins. Crimp 0.5 - 1.42 (22-16)

Ins. Ø2.0-3.2mm

91577-1 MULTILOCK 040 0.4 - 0.6 (22-20)

91505-1 TYPE III+ 0.2 - 1.42 (24-16)

深圳湾边贸易

1901600-2 PIDG STRATO-THERM 1.0 - 1.5 (18-16)

1901611-2 PIDG STRATO-THERM 0.2 - 0.6 (24-20)

1901600-1 PIDG STRATO-THERM 1.0 - 1.5 (18-16)

1901611-1 PIDG STRATO-THERM 0.2 - 0.6 (24-20)

1213805-[ ] Battery Tool Kit

1213860-[ ] Adapter, Electric Terminator

1-1901600-2 PIDG STRATO-THERM 1.0 - 1.5 (18-16)

1-1901611-1 PIDG STRATO-THERM 0.2 - 0.6 (24-20)

Example 91500-1 CERTI-CRIMP II SAHT; handles can be

1213805-2 - Kit only without Head

1213805-5 - Kit only without Head (GB Power Plug)

Image representative of type only

1213860-1 - Adapter only

45216 PIDG Closed End Splice 1.0 - 1.5 (18-16)

90009-8 Special GB Railways PIDG FASTON Tool

Qualifications: LUL RSE 024 pt6 & EE6161

1.5 - 2.5 (16-14)

90035-3 Special GB Railways PIDG FASTON Tool

Qualifications: LUL RSE 024 pt6 & EE6161

0.4 - 1.0 (22-18)

482930-1 Special French tool for PIDG FASTON 2.8 (.110) with crimp orientation at 90°

Marks the applied product with a one dot indent code.

0.15 - 0.4 (26-22)

46121 Standard Tool for PIDG; PLASTI-GRIP Butt Splices

Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161

Marks the applied product with a one dot indent code

0.15 - 0.4 (26-22)

47386 Standard Tool for PIDG & PLASTI-GRIP Terminals and PIDG Splices - GB Railways

Qualifications: Mil-T-7928/7; LUL RSE 024 pt6 & EE6161

Marks the applied product with a one dot indent code.

0.4 - 1.5 (22-16)

Ins. Ø3.18mm max

47386-5 French PIDG & PLASTI-GRIP Ring Tongue Tool - includes French Instuction Sheet

Meets Mil-T-7928 - AMP specified level

Marks the applied product with a one dot indent code.

0.4 - 1.5 (22-16)

47387 Standard Tool for PIDG & PLASTI-GRIP Terminals and Splices - GB Railways

Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161

Marks the applied product with a two dot indent code.

1.25 - 2.0 (16-14)

0.6 - 1.5 (20-16) HD

Ins. Ø3.8mm1 max

525690 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.

Equivalent to 47386 but has special retaining pins/rings to reduce the risk of tool

parts falling off whilst building and maintaining aircraft.

0.6 - 1.0 (20-18)

525691 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.

Equivalent to 47387 but has special retaining pins/rings to reduce the risk of tool

parts falling off whilst building and maintaining aircraft.

1.5 - 2.5 (16-14)

47386-4 GB Special for PIDG & PLASTI-GRIP Ring Tongue's & FASTON's

Meets Mil-T-7928 - AMP specified level for Ringtongues only

Marks the applied product with a one dot indent code.

0.4 - 1.5 (22-16)

47387-7 GB Special for PIDG & PLASTI-GRIP Ring Tongue's and FASTON's:

Meets Mil-T-7928 - AMP specified level for Ring Tongues only

Marks the applied product with a two dot indent code.

1.5 - 2.5 (16-14)

0.6 - 1.5 (20-16) HD

46447 SOLISTRAND High Temp Terminals and Splices 0.4 - 6.0 (22-10)

49592 Standard Tool for SOLISTRAND

Qualifications: Mil-T-7928

2.5 - 4.0 (14-12)

49935 Standard Tool for SOLISTRAND Terminals and Splices

Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161

0.4 - 6.0 (22-10)

69363 Standard tool for SOLISTRAND

Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161

0.15 - 0.6 (26-20)

525693 Special tool for SOLISTRAND (GB)

Qualifications: Mil-T-7928; LUL RSE 024 pt6 & EE6161

Equivalent to 49935 but has special retaining pins/rings to reduce the risk of tool

parts falling off whilst building and maintaining aircraft.

0.4 - 6.0 (22-10)

46673 STRATO-THERM Uninsulated 0.4 - 1.5 (22-16)

46673-1 STRATO-THERM Uninsulated without Insulation Support 0.4 - 1.5 (22-16)

Example 47386 DAHT; handles can be removed and the head

used with this kit.

Over 100 crimps per charge

Compact - only 360mm (14") long and weighs 1.57kg (3.48lbs)

The Tool Kit is supplied in a durable plastic carry case and

includes:

Battery Tool with the relevant DAHT Adapter

Battery Charger 230 v

Two Batteries

for more information, please see the Power Assist section

Convert your existing Hand Tools into Powered!

1213804-2 - Kit only without Head

1213804-5 - Kit only without Head (GB Power Plug)

Hand held power unit 189721-1

or

Foot actuated Power Unit 189722-1

for more information, please see the Power Assist section

.

1213563-1 - Adapter only

深圳湾边贸易

69710-1 - Base Tool without Die-set

Widely used in Aircraft and Military applications

1901260-1 Base Tool without Die-set

A light duty alternative to 69710-1

深圳湾边贸易

Open Head 1213840-[ ]

Closed Head 1213819-[ ]

Adapters for C-Head Dies:

Electric Terminator 1901556-1

Press SSC- 2FP 8-1481221-3

A range of Die-sets for many premium crimp applications

58212-1 AMPLIMITE RG 142, 142A, 142B

576711 PIDG STRATO-THERM 0.2 - 0.4 (24-22)

576714 PIDG STRATO-THERM 1.5 (16)

576715 PIDG STRATO-THERM 1.0 (18)

576720 PIDG STRATO-THERM 0.5 (22)

47807-1 PIDG, PLASTI-GRIP 1.5 - 2.5 (16-14)

47806-2 PIDG, PLASTI-GRIP, 0.4 - 1.5 (22-16)

1-539634-9 Pin 50 ohm, size 8 kit Gore Cable Type:

GSC-03-81748-00

Hand Tool Frame 69710-1

Adapters for C-Head Dies:

Electric Terminator 1901556-1

Press SSC- 2FP 8-1481221-3

59993-1 AMPLIMITE 8 (10)

576716 PIDG STRATO-THERM 2.5 (14)

576723 PIDG STRATO-THERM

576742 PIDG STRATO-THERM 4.0 (12)

69735 PIDG STRATO-THERM 4.0 - 6.0 (12-10)

47808-6 PIDG, PLASTI-GRIP 4.0 - 6.0 (12-10)

90140-1 TYPE XII Contact 6.0 - 10.0 (10-8)

90145-1 TYPE XII Contact 2.5 - 4.0 (14-12)

58380-1 Universal MATE-N-LOK 3.0 (12)

58380-2 Universal MATE-N-LOK 5.0 (10)

深圳湾边贸易

General Hand Tool Types Revised: July 2008

C-Head SAHT Battery Tool Kit

1213819-2 - CLOSED head

1213819-5 - CLOSED head (GB Power Plug)

1213840-2 - OPEN head

1213840-5 - OPEN head (GB Power Plug)

深圳湾边贸易

234170-1 AMP DYNAMIC D-5 1.5 - 2.5 (16-14)

234171-1 AMP DYNAMIC D-5 4.0 - 6.0 (12-10)

1366044-1 AMP DYNAMIC D-5 Receptacle 8.0 (10)

90246-1 Standard tool for PIDG FASTON 2.5 - 4.0 (14-12)

90276-2 Special GB Railways PIDG FASTON Tool

Qualifications: LUL RSE 024 pt6 & EE6161

484364-1 PIDG STRATO-THERM 1.0 (18)

59287-2 PIDG, PLASTI-GRIP Large Expansion 4.0 - 6.0 (12-10)

525692 Special GB Aerospace PIDG & PLASTI-GRIP Ring Tongue Tool.

69322-1 SOLISTRAND High Temp Parallel Splice 0.4 - 6.0 (22-10)

69355 SOLISTRAND 10.0 (8)

59461 STRATO-THERM Uninsulated with Insulation Support 4.0 - 6.0 (12-10)

(16-14) HD

90382-2 TYPE XII Contact 1.5 - 4.0 (16-12)

90384-1 TYPE XII Contact 6.0 - 10.0 (10-8)

深圳湾边贸易

1901235-2 - Kit only without head

1901235-5 - Kit only without head (GB Power Plug)

the Handles from 59239-4 can be removed and the head used

Hand held power unit 189721-1

or Foot actuated Power Unit 189722-1

525432-1 - Adapter only

深圳湾边贸易

169400 Base Tool without Die-set

656075-1 Complete tool for LOCKING CLIP 0.03 - 0.56 (32-20)

169404 Die-set for PIDG, PLASTI-GRIP

Use in Hand Tool Frame 169400

GB Railways PIDG & PLASTI-GRIP Tool (Signal only)

Meets; Mil-T 7928 F, VG 88720, DIN 41611

0.6 - 6.0 (20-10)

169409 Die-set for SOLISTRAND

深圳湾边贸易

169424-1 AMPLIMITE HD-20 0.08 - 0.56 (28-20)

Ins. Ø0.76-1.52mm

734643-1 AMPLIVAR

734203-1 AMPMODU IV 0.12 - 0.14 (26)

734204-1 AMPMODU IV 0.2 -0.56 (24-20)

734870-1 MICRO MATCH COSI contact 0.2 - 0.6 (24-20)

734870-2 MICRO MATCH COSI contact 0.08 - 0.2 (28-24)

539608-1 MODU II 0.02 - 0.20 (32-24)

734216-1 TYPE III+ 0.2 - 1.5 (24-16)

Ins. Ø1.1-2.5mm

539717-1 - Base Tool without Die-set

1579000-1 - Base Tool without Die-set Long Handles Image representative of type only

Part Number Description mm2 (AWG) or other

1579002-6 PIDG STRATO-THERM 0.2 - 0.4 (24-22)

1579002-7 PIDG STRATO-THERM 1.0 - 2.5 (18-14)

7-1579001-2 POSITIVE-LOK 0.35 - 0.75 (24-18)

7-1579001-3 POSITIVE-LOK 0.5 - 0.75 (22-20)

7-1579001-4 Die-set for Ring Tongue (similar to DIN 46225) 1.0 - 2.5 (18-14)

深圳湾边贸易

9-1579004-6 MCON 2.8 Receptacle 0.2 - 0.35 (24-22)

Ins. Ø1.15-1.4mm

try {Dd('type_0').style.backgroundColor = '#F1F1F1';}catch (e){} var content_id = 'content'; var img_max_width = 1000;